Amplifiers

140 WATT HF AMP COMPONENT SET The AN762 amplifier is designed for mobile operations. The amplifier operates over the 1.6 to 30 MHZ frequency band with a 13.6 Vdc power supply. Two MRF454 transistors are used to generate a 140 watt output. The use of...

600W EB104 HF AMP COMPONENT SET This push-pull/parallel circuit produces a power output of 600 watts across the 2 to 30 MHz band using four RF devices without the added loss and cost of power splitters and combiners. Motorola MRF150 RF power FET makes it...

EB63A 140W HF AMP COMPONENT SET The EB63 amplifier has an output of 140 watts (PEP) over a frequency range of 2-30MHz.  The amplifier uses two MRF454 transistors which are specified at 80 watts power output with 5 watts of input drive. The amplifier...

AN779L  20 WATT LOW GAIN HF AMP COMPONENT SET The AN779L driver amplifier provides a power output of 20 watts with a total power gain of 25 dB and the construction technique allows the use of inexpensive components throughout. The plastic RF power...

  AN762-180 180 WATT HF AMP COMPONENT SET The AN762-180 amplifier is designed for mobile operations. The amplifier operates over the 1.6 to 30 MHZ frequency band with a 13.6 Vdc power supply. Two MRF421 transistors are used to generate a 180 watt...

AN758  300 WATT HF AMPLIFIER COMPONENT SET The AN758 HF amplifier is a push-pull linear amplifier for 300 watts of PEP or CW output power across the 2 to 30 MHZ band. One of Motorola's new high-power transistors developed for single-sideband, the...

300W EB27A HF AMP COMPONENT SET The EB27A HF amplifier is a push-pull linear amplifier for 300 watts of PEP or CW output power across the 2 to 30 MHZ band. One of Motorola's new high-power transistors developed for single-sideband, the MRF-422, is used...

AN779H-12  20 WATT HI GAIN HF AMP - 12V COMPONENT SET The AN779H driver amplifier provides a power output of 20 watts SSB (without module) with a maximum power gain of 18 dB and the construction technique allows the use of inexpensive components...

1000W HF AMP COMPONENT SET This amplifier design covers frequencies from 2 to 50 Mhz with a power output level of 1000 watts using RF power MOSFETs. The MRF154 used in this design is considered as a state of the art device. The MRF154 is usable up to...

2M 1KW AMPLIFIER COMPONENT SET The component set includes: 1 ea.   Capacitor Set                   1 ea.   Resistor Set 1 ea.  ...

AR305 300 HF AMP COMPONENT SET This amplifier design covers frequencies from HF to VHF with a power output level of 300 watts using RF power MOSFETs. The MRF151G used in this design is considered as a state of the art device. The MRF151G is housed in a...

88-108MHZ FM BROADCAST COMPONENT SET The component set includes: 1 ea.   Capacitor Set                  1 ea.   Resistor Set 1 ea.   Ferrite...